// Copyright (c) 2009-2010 Satoshi Nakamoto

// Copyright (c) 2009-present The Bitcoin Core developers

// Distributed under the MIT software license, see the accompanying

// file COPYING or http://www.opensource.org/licenses/mit-license.php.

#include <bitcoin-build-config.h> // IWYU pragma: keep

#include <init.h>

#include <addrdb.h>

#include <addrman.h>

#include <banman.h>

#include <blockfilter.h>

#include <chain.h>

#include <chainparams.h>

#include <chainparamsbase.h>

#include <clientversion.h>

#include <common/args.h>

#include <common/messages.h>

#include <common/system.h>

#include <compat/compat.h>

#include <consensus/params.h>

#include <crypto/hex_base.h>

#include <dbwrapper.h>

#include <httprpc.h>

#include <httpserver.h>

#include <index/base.h>

#include <index/blockfilterindex.h>

#include <index/coinstatsindex.h>

#include <index/txindex.h>

#include <index/txospenderindex.h>

#include <init/common.h>

#include <interfaces/chain.h>

#include <interfaces/init.h>

#include <interfaces/ipc.h>

#include <interfaces/node.h>

#include <ipc/exception.h>

#include <ipc/types.h>

#include <kernel/blockmanager_opts.h>

#include <kernel/caches.h>

#include <kernel/chainstatemanager_opts.h>

#include <kernel/checks.h>

#include <kernel/context.h>

#include <kernel/notifications_interface.h>

#include <key.h>

#include <logging.h>

#include <mapport.h>

#include <net.h>

#include <net_permissions.h>

#include <net_processing.h>

#include <netaddress.h>

#include <netbase.h>

#include <netgroup.h>

#include <node/block_template_manager.h>

#include <node/blockmanager_args.h>

#include <node/blockstorage.h>

#include <node/caches.h>

#include <node/chainstate.h>

#include <node/chainstatemanager_args.h>

#include <node/context.h>

#include <node/interface_ui.h>

#include <node/kernel_notifications.h>

#include <node/mempool_args.h>

#include <node/mempool_persist.h>

#include <node/mempool_persist_args.h>

#include <node/mining_args.h>

#include <node/peerman_args.h>

#include <policy/feerate.h>

#include <policy/fees/block_policy_estimator.h>

#include <policy/fees/estimator_args.h>

#include <policy/fees/estimator_man.h>

#include <policy/policy.h>

#include <policy/settings.h>

#include <protocol.h>

#include <random.h>

#include <rpc/register.h>

#include <rpc/server.h>

#include <rpc/util.h>

#include <scheduler.h>

#include <script/sigcache.h>

#include <sync.h>

#include <tinyformat.h>

#include <torcontrol.h>

#include <txgraph.h>

#include <txmempool.h>

#include <uint256.h>

#include <util/asmap.h>

#include <util/batchpriority.h>

#include <util/btcsignals.h>

#include <util/byte_units.h>

#include <util/chaintype.h>

#include <util/check.h>

#include <util/fs.h>

#include <util/fs_helpers.h>

#include <util/moneystr.h>

#include <util/overflow.h>

#include <util/result.h>

#include <util/signalinterrupt.h>

#include <util/strencodings.h>

#include <util/string.h>

#include <util/syserror.h>

#include <util/thread.h>

#include <util/threadnames.h>

#include <util/time.h>

#include <util/translation.h>

#include <validation.h>

#include <validationinterface.h>

#include <walletinitinterface.h>

#include <algorithm>

#include <any>

#include <cerrno>

#include <condition_variable>

#include <cstddef>

#include <cstdint>

#include <exception>

#include <fstream>

#include <functional>

#include <limits>

#include <list>

#include <memory>

#include <new>

#include <optional>

#include <set>

#include <span>

#include <string>

#include <system_error>

#include <thread>

#include <tuple>

#include <utility>

#include <vector>

#ifndef WIN32

#include <csignal>

#endif

#ifdef ENABLE_ZMQ

#include <zmq/zmqabstractnotifier.h>

#include <zmq/zmqnotificationinterface.h>

#include <zmq/zmqrpc.h>

#endif

#ifdef ENABLE_EMBEDDED_ASMAP

#include <node/data/ip_asn.dat.h>

#endif

using common::InvalidPortErrMsg;

using common::ResolveErrMsg;

using node::ApplyArgsManOptions;

using node::BlockManager;

using node::CalculateCacheSizes;

using node::ChainstateLoadResult;

using node::ChainstateLoadStatus;

using node::DEFAULT_PERSIST_MEMPOOL;

using node::DEFAULT_PRINT_MODIFIED_FEE;

using node::DEFAULT_STOPATHEIGHT;

using node::DumpMempool;

using node::ImportBlocks;

using node::KernelNotifications;

using node::LoadChainstate;

using node::LoadMempool;

using node::MempoolPath;

using node::NodeContext;

using node::ShouldPersistMempool;

using node::VerifyLoadedChainstate;

using util::Join;

using util::ReplaceAll;

using util::ToString;

using util::TrimStringView;

static constexpr bool DEFAULT_PROXYRANDOMIZE{true};

static constexpr bool DEFAULT_REST_ENABLE{false};

static constexpr bool DEFAULT_I2P_ACCEPT_INCOMING{true};

static constexpr bool DEFAULT_STOPAFTERBLOCKIMPORT{false};

#ifdef WIN32

// Win32 LevelDB doesn't use filedescriptors, and the ones used for

// accessing block files don't count towards the fd_set size limit

// anyway.

#define MIN_LEVELDB_FDS 0

#else

#define MIN_LEVELDB_FDS 150

#endif

static constexpr int MIN_CORE_FDS = MIN_LEVELDB_FDS + NUM_FDS_MESSAGE_CAPTURE;

/**

 * The PID file facilities.

 */

static const char* BITCOIN_PID_FILENAME = "bitcoind.pid";

/**

 * True if this process has created a PID file.

 * Used to determine whether we should remove the PID file on shutdown.

 */

static bool g_generated_pid{false};

static fs::path GetPidFile(const ArgsManager& args)

{

    return AbsPathForConfigVal(args, args.GetPathArg("-pid", BITCOIN_PID_FILENAME));

}

[[nodiscard]] static bool CreatePidFile(const ArgsManager& args)

{

    if (args.IsArgNegated("-pid")) return true;

    std::ofstream file{GetPidFile(args).std_path()};

    if (file) {

#ifdef WIN32

        tfm::format(file, "%d\n", GetCurrentProcessId());

#else

        tfm::format(file, "%d\n", getpid());

#endif

        g_generated_pid = true;

        return true;

    } else {

        return InitError(strprintf(_("Unable to create the PID file '%s': %s"), fs::PathToString(GetPidFile(args)), SysErrorString(errno)));

    }

}

static void RemovePidFile(const ArgsManager& args)

{

    if (!g_generated_pid) return;

    const auto pid_path{GetPidFile(args)};

    if (std::error_code error; !fs::remove(pid_path, error)) {

        std::string msg{error ? error.message() : "File does not exist"};

        LogWarning("Unable to remove PID file (%s): %s", fs::PathToString(pid_path), msg);

    }

}

static std::optional<util::SignalInterrupt> g_shutdown;

void InitContext(NodeContext& node)

{

    assert(!g_shutdown);

    g_shutdown.emplace();

    node.args = &gArgs;

    node.shutdown_signal = &*g_shutdown;

    node.shutdown_request = [&node] {

        assert(node.shutdown_signal);

        if (!(*node.shutdown_signal)()) return false;

        return true;

    };

}

//////////////////////////////////////////////////////////////////////////////

//

// Shutdown

//

//

// Thread management and startup/shutdown:

//

// The network-processing threads are all part of a thread group

// created by AppInit() or the Qt main() function.

//

// A clean exit happens when the SignalInterrupt object is triggered, which

// makes the main thread's SignalInterrupt::wait() call return, and join all

// other ongoing threads in the thread group to the main thread.

// Shutdown() is then called to clean up database connections, and stop other

// threads that should only be stopped after the main network-processing

// threads have exited.

//

// Shutdown for Qt is very similar, only it uses a QTimer to detect

// ShutdownRequested() getting set, and then does the normal Qt

// shutdown thing.

//

bool ShutdownRequested(node::NodeContext& node)

{

    return bool{*Assert(node.shutdown_signal)};

}

#if HAVE_SYSTEM

static void ShutdownNotify(const ArgsManager& args)

{

    std::vector<std::thread> threads;

    for (const auto& cmd : args.GetArgs("-shutdownnotify")) {

        threads.emplace_back(runCommand, cmd);

    }

    for (auto& t : threads) {

        t.join();

    }

}

#endif

void Interrupt(NodeContext& node)

{

#if HAVE_SYSTEM

    ShutdownNotify(*node.args);

#endif

    // Wake any threads that may be waiting for the tip to change.

    if (node.notifications) WITH_LOCK(node.notifications->m_tip_block_mutex, node.notifications->m_tip_block_cv.notify_all());

    InterruptHTTPServer();

    InterruptHTTPRPC();

    InterruptRPC();

    InterruptREST();

    if (node.tor_controller) {

        node.tor_controller->Interrupt();

    }

    InterruptMapPort();

    if (node.connman)

        node.connman->Interrupt();

    for (auto* index : node.indexes) {

        index->Interrupt();

    }

}

void Shutdown(NodeContext& node)

{

    static Mutex g_shutdown_mutex;

    TRY_LOCK(g_shutdown_mutex, lock_shutdown);

    if (!lock_shutdown) return;

    LogInfo("Shutdown in progress...");

    Assert(node.args);

    /// Note: Shutdown() must be able to handle cases in which initialization failed part of the way,

    /// for example if the data directory was found to be locked.

    /// Be sure that anything that writes files or flushes caches only does this if the respective

    /// module was initialized.

    util::ThreadRename("shutoff");

    if (node.mempool) node.mempool->AddTransactionsUpdated(1);

    StopHTTPRPC();

    StopREST();

    StopRPC();

    StopHTTPServer();

    for (auto& client : node.chain_clients) {

        try {

            client->stop();

        } catch (const ipc::Exception& e) {

            LogDebug(BCLog::IPC, "Chain client did not disconnect cleanly: %s", e.what());

            client.reset();

        }

    }

    StopMapPort();

    // Because these depend on each-other, we make sure that neither can be

    // using the other before destroying them.

    if (node.peerman && node.validation_signals) node.validation_signals->UnregisterValidationInterface(node.peerman.get());

    if (node.connman) node.connman->Stop();

    if (node.tor_controller) {

        node.tor_controller->Join();

        node.tor_controller.reset();

    }

    if (node.background_init_thread.joinable()) node.background_init_thread.join();

    // After everything has been shut down, but before things get flushed, stop the

    // the scheduler. After this point, SyncWithValidationInterfaceQueue() should not be called anymore

    // as this would prevent the shutdown from completing.

    if (node.scheduler) node.scheduler->stop();

    // After the threads that potentially access these pointers have been stopped,

    // destruct and reset all to nullptr.

    node.peerman.reset();

    node.connman.reset();

    node.banman.reset();

    node.addrman.reset();

    node.netgroupman.reset();

    if (node.mempool && node.mempool->GetLoadTried() && ShouldPersistMempool(*node.args)) {

        DumpMempool(*node.mempool, MempoolPath(*node.args));

    }

    // FlushStateToDisk generates a ChainStateFlushed callback, which we should avoid missing

    if (node.chainman) {

        LOCK(cs_main);

        for (const auto& chainstate : node.chainman->m_chainstates) {

            if (chainstate->CanFlushToDisk()) {

                chainstate->ForceFlushStateToDisk();

            }

        }

    }

    // After there are no more peers/RPC left to give us new data which may generate

    // CValidationInterface callbacks, flush them...

    if (node.validation_signals) node.validation_signals->FlushBackgroundCallbacks();

    // Once callbacks drain, drop tracked transactions, save estimates, and unregister the estimator

    if (node.fee_estimator_man) {

        node.fee_estimator_man->ShutdownFlush();

        if (node.validation_signals) {

            node.validation_signals->UnregisterValidationInterface(node.fee_estimator_man.get());

        }

    }

    // Stop and delete all indexes only after flushing background callbacks.

    for (auto* index : node.indexes) index->Stop();

    if (g_txindex) g_txindex.reset();

    if (g_txospenderindex) g_txospenderindex.reset();

    if (g_coin_stats_index) g_coin_stats_index.reset();

    DestroyAllBlockFilterIndexes();

    node.indexes.clear(); // all instances are nullptr now

    // Callbacks queued by this final chainstate flush will not run during shutdown

    if (node.chainman) {

        LOCK(cs_main);

        for (const auto& chainstate : node.chainman->m_chainstates) {

            if (chainstate->CanFlushToDisk()) {

                chainstate->ForceFlushStateToDisk();

                chainstate->ResetCoinsViews();

            }

        }

    }

    // If any -ipcbind clients are still connected, disconnect them now so they

    // do not block shutdown.

    if (interfaces::Ipc* ipc = node.init->ipc()) {

        ipc->disconnectIncoming();

    }

#ifdef ENABLE_ZMQ

    if (g_zmq_notification_interface) {

        if (node.validation_signals) node.validation_signals->UnregisterValidationInterface(g_zmq_notification_interface.get());

        g_zmq_notification_interface.reset();

    }

#endif

    node.chain_clients.clear();

    if (node.validation_signals) {

        node.validation_signals->UnregisterAllValidationInterfaces();

    }

    node.fee_estimator_man.reset();

    node.block_template_manager.reset();

    node.mempool.reset();

    node.chainman.reset();

    node.validation_signals.reset();

    node.scheduler.reset();

    node.ecc_context.reset();

    node.kernel.reset();

    RemovePidFile(*node.args);

    LogInfo("Shutdown done");

}

/**

 * Signal handlers are very limited in what they are allowed to do.

 * The execution context the handler is invoked in is not guaranteed,

 * so we restrict handler operations to just touching variables:

 */

#ifndef WIN32

static void HandleSIGTERM(int)

{

    // Return value is intentionally ignored because there is not a better way

    // of handling this failure in a signal handler.

    (void)(*Assert(g_shutdown))();

}

static void HandleSIGHUP(int)

{

    LogInstance().m_reopen_file = true;

}

#else

static BOOL WINAPI consoleCtrlHandler(DWORD dwCtrlType)

{

    if (!(*Assert(g_shutdown))()) {

        LogError("Failed to send shutdown signal on Ctrl-C\n");

        return false;

    }

    Sleep(INFINITE);

    return true;

}

#endif

#ifndef WIN32

static void registerSignalHandler(int signal, void(*handler)(int))

{

    struct sigaction sa;

    sa.sa_handler = handler;

    sigemptyset(&sa.sa_mask);

    sa.sa_flags = 0;

    sigaction(signal, &sa, nullptr);

}

#endif

void SetupServerArgs(ArgsManager& argsman, bool can_listen_ipc)

{

    SetupHelpOptions(argsman);

    argsman.AddArg("-help-debug", "Print help message with debugging options and exit", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST); // server-only for now

    init::AddLoggingArgs(argsman);

    const auto defaultBaseParams = CreateBaseChainParams(argsman, ChainType::MAIN);

    const auto testnetBaseParams = CreateBaseChainParams(argsman, ChainType::TESTNET);

    const auto testnet4BaseParams = CreateBaseChainParams(argsman, ChainType::TESTNET4);

    const auto signetBaseParams = CreateBaseChainParams(argsman, ChainType::SIGNET);

    const auto regtestBaseParams = CreateBaseChainParams(argsman, ChainType::REGTEST);

    const auto defaultChainParams = CreateChainParams(argsman, ChainType::MAIN);

    const auto testnetChainParams = CreateChainParams(argsman, ChainType::TESTNET);

    const auto testnet4ChainParams = CreateChainParams(argsman, ChainType::TESTNET4);

    const auto signetChainParams = CreateChainParams(argsman, ChainType::SIGNET);

    const auto regtestChainParams = CreateChainParams(argsman, ChainType::REGTEST);

    // Hidden Options

    std::vector<std::string> hidden_args = {

        "-dbcrashratio", "-forcecompactdb",

        // GUI args. These will be overwritten by SetupUIArgs for the GUI

        "-choosedatadir", "-lang=<lang>", "-min", "-resetguisettings", "-splash", "-uiplatform"};

    argsman.AddArg("-version", "Print version and exit", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#if HAVE_SYSTEM

    argsman.AddArg("-alertnotify=<cmd>", "Execute command when an alert is raised (%s in cmd is replaced by message)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#endif

    argsman.AddArg("-assumevalid=<hex>", strprintf("If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet3: %s, testnet4: %s, signet: %s)", defaultChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnetChainParams->GetConsensus().defaultAssumeValid.GetHex(), testnet4ChainParams->GetConsensus().defaultAssumeValid.GetHex(), signetChainParams->GetConsensus().defaultAssumeValid.GetHex()), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-blocksdir=<dir>", "Specify directory to hold blocks subdirectory for *.dat files (default: <datadir>)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-blocksxor",

                   strprintf("Whether an XOR-key applies to blocksdir *.dat files. "

                             "The created XOR-key will be zeros for an existing blocksdir or when `-blocksxor=0` is "

                             "set, and random for a freshly initialized blocksdir. "

                             "(default: %u)",

                             kernel::DEFAULT_XOR_BLOCKSDIR),

                   ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-fastprune", "Use smaller block files and lower minimum prune height for testing purposes", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

#if HAVE_SYSTEM

    argsman.AddArg("-blocknotify=<cmd>", "Execute command when the best block changes (%s in cmd is replaced by block hash). Not run for blocks connected during initial block download or reindexing.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#endif

    argsman.AddArg("-blockreconstructionextratxn=<n>", strprintf("Extra transactions to keep in memory for compact block reconstructions (default: %u)", DEFAULT_BLOCK_RECONSTRUCTION_EXTRA_TXN), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-blocksonly", strprintf("Whether to reject transactions from network peers. Disables automatic broadcast and rebroadcast of transactions, unless the source peer has the 'forcerelay' permission. RPC transactions are not affected. (default: %u)", DEFAULT_BLOCKSONLY), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-coinstatsindex", strprintf("Maintain coinstats index used by the gettxoutsetinfo RPC (default: %u)", DEFAULT_COINSTATSINDEX), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-conf=<file>", strprintf("Specify path to read-only configuration file. Relative paths will be prefixed by datadir location (only useable from command line, not configuration file) (default: %s)", BITCOIN_CONF_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-datadir=<dir>", "Specify data directory", ArgsManager::ALLOW_ANY | ArgsManager::DISALLOW_NEGATION, OptionsCategory::OPTIONS);

    argsman.AddArg("-dbbatchsize", strprintf("Maximum database write batch size in bytes (default: %u)", DEFAULT_DB_CACHE_BATCH), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::OPTIONS);

    argsman.AddArg("-dbcache=<n>", strprintf("Maximum database cache size <n> MiB (minimum %d, default: %d). Make sure you have enough RAM. In addition, unused memory allocated to the mempool is shared with this cache (see -maxmempool).", MIN_DBCACHE_BYTES / 1_MiB, node::GetDefaultDBCache() / 1_MiB), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-includeconf=<file>", "Specify additional configuration file, relative to the -datadir path (only useable from configuration file, not command line)", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-allowignoredconf", strprintf("For backwards compatibility, treat an unused %s file in the datadir as a warning, not an error.", BITCOIN_CONF_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-loadblock=<file>", "Imports blocks from an external file on startup. Obfuscated blocks are not supported.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-maxmempool=<n>", strprintf("Keep the transaction memory pool below <n> megabytes (default: %u)", DEFAULT_MAX_MEMPOOL_SIZE_MB), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-mempoolexpiry=<n>", strprintf("Do not keep transactions in the mempool longer than <n> hours (default: %u)", DEFAULT_MEMPOOL_EXPIRY_HOURS), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-minimumchainwork=<hex>", strprintf("Minimum work assumed to exist on a valid chain in hex (default: %s, testnet3: %s, testnet4: %s, signet: %s)", defaultChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnetChainParams->GetConsensus().nMinimumChainWork.GetHex(), testnet4ChainParams->GetConsensus().nMinimumChainWork.GetHex(), signetChainParams->GetConsensus().nMinimumChainWork.GetHex()), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::OPTIONS);

    argsman.AddArg("-par=<n>", strprintf("Set the number of script verification threads (0 = auto, up to %d, <0 = leave that many cores free, default: %d)",

        MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-prevoutfetchthreads=<n>", strprintf("Set the number of threads used to prefetch block input prevouts from the chainstate database (0 disables, up to %d, default: %d). Negative values are rejected.", MAX_PREVOUTFETCH_THREADS, DEFAULT_PREVOUTFETCH_THREADS), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-persistmempool", strprintf("Whether to save the mempool on shutdown and load on restart (default: %u)", DEFAULT_PERSIST_MEMPOOL), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-pid=<file>", strprintf("Specify pid file. Relative paths will be prefixed by a net-specific datadir location. (default: %s)", BITCOIN_PID_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-prune=<n>", strprintf("Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex. "

            "Warning: Reverting this setting requires re-downloading the entire blockchain. Wallets and indexes should be loaded at startup and kept active while pruning is enabled so they stay synchronized before old block data is deleted; wallets or indexes that fall behind pruned data may require a reindex. "

            "(default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >=%u = automatically prune block files to stay under the specified target size in MiB)", MIN_DISK_SPACE_FOR_BLOCK_FILES / 1_MiB), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-reindex", "If enabled, wipe chain state and block index, and rebuild them from blk*.dat files on disk. Also wipe and rebuild other optional indexes that are active. If an assumeutxo snapshot was loaded, its chainstate will be wiped as well. The snapshot can then be reloaded via RPC.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-reindex-chainstate", "If enabled, wipe chain state, and rebuild it from blk*.dat files on disk. If an assumeutxo snapshot was loaded, its chainstate will be wiped as well. The snapshot can then be reloaded via RPC.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-settings=<file>", strprintf("Specify path to dynamic settings data file. Can be disabled with -nosettings. File is written at runtime and not meant to be edited by users (use %s instead for custom settings). Relative paths will be prefixed by datadir location. (default: %s)", BITCOIN_CONF_FILENAME, BITCOIN_SETTINGS_FILENAME), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#if HAVE_SYSTEM

    argsman.AddArg("-startupnotify=<cmd>", "Execute command on startup.", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-shutdownnotify=<cmd>", "Execute command immediately before beginning shutdown. The need for shutdown may be urgent, so be careful not to delay it long (if the command doesn't require interaction with the server, consider having it fork into the background).", ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#endif

    argsman.AddArg("-txindex", strprintf("Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)", DEFAULT_TXINDEX), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-txospenderindex", strprintf("Maintain a transaction output spender index, used by the gettxspendingprevout rpc call (default: %u)", DEFAULT_TXOSPENDERINDEX), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-blockfilterindex=<type>",

                 strprintf("Maintain an index of compact filters by block (default: %s, values: %s).", DEFAULT_BLOCKFILTERINDEX, ListBlockFilterTypes()) +

                 " If <type> is not supplied or if <type> = 1, indexes for all known types are enabled.",

                 ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-addnode=<ip>", strprintf("Add a node to connect to and attempt to keep the connection open (see the addnode RPC help for more info). This option can be specified multiple times to add multiple nodes; connections are limited to %u at a time and are counted separately from the -maxconnections limit.", MAX_ADDNODE_CONNECTIONS), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION);

    argsman.AddArg("-asmap=<file>", strprintf("Specify asn mapping used for bucketing of the peers. Relative paths will be prefixed by the net-specific datadir location.%s",

                #ifdef ENABLE_EMBEDDED_ASMAP

                    " If a bool arg is given (-asmap or -asmap=1), the embedded mapping data in the binary will be used."

                #else

                    ""

                #endif

                ), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-bantime=<n>", strprintf("Default duration (in seconds) of manually configured bans (default: %u)", DEFAULT_MISBEHAVING_BANTIME), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-bind=<addr>[:<port>][=onion]", strprintf("Bind to given address and always listen on it (default: 0.0.0.0). Use [host]:port notation for IPv6. Append =onion to tag any incoming connections to that address and port as incoming Tor connections (default: 127.0.0.1:%u=onion, testnet3: 127.0.0.1:%u=onion, testnet4: 127.0.0.1:%u=onion, signet: 127.0.0.1:%u=onion, regtest: 127.0.0.1:%u=onion)", defaultChainParams->GetDefaultPort() + 1, testnetChainParams->GetDefaultPort() + 1, testnet4ChainParams->GetDefaultPort() + 1, signetChainParams->GetDefaultPort() + 1, regtestChainParams->GetDefaultPort() + 1), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION);

    argsman.AddArg("-cjdnsreachable", "If set, then this host is configured for CJDNS (connecting to fc00::/8 addresses would lead us to the CJDNS network, see doc/cjdns.md) (default: 0)", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-connect=<ip>", "Connect only to the specified node; -noconnect disables automatic connections (the rules for this peer are the same as for -addnode). This option can be specified multiple times to connect to multiple nodes.", ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION);

    argsman.AddArg("-discover", "Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-dns", strprintf("Allow DNS lookups for -addnode, -seednode and -connect (default: %u)", DEFAULT_NAME_LOOKUP), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-dnsseed", strprintf("Query for peer addresses via DNS lookup, if low on addresses (default: %u unless -connect used or -maxconnections=0)", DEFAULT_DNSSEED), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-externalip=<ip>", "Specify your own public address", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-fixedseeds", strprintf("Allow fixed seeds if DNS seeds don't provide peers (default: %u)", DEFAULT_FIXEDSEEDS), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-forcednsseed", strprintf("Always query for peer addresses via DNS lookup (default: %u)", DEFAULT_FORCEDNSSEED), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-listen", strprintf("Accept connections from outside (default: %u if no -proxy, -connect or -maxconnections=0)", DEFAULT_LISTEN), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-listenonion", strprintf("Automatically create Tor onion service (default: %d)", DEFAULT_LISTEN_ONION), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-maxconnections=<n>", strprintf("Maintain at most <n> automatic connections to peers (default: %u). %u slots of these are reserved for outgoing connections. See -inboundrelaypercent for more information about limits applied to transaction relay inbound peers. "

                                                    "This limit does not apply to connections manually added via -addnode or the addnode RPC, which have a separate limit of %u. "

                                                    "It does not apply to short-lived private broadcast connections either, which have a separate limit of %u.",

                                                    DEFAULT_MAX_PEER_CONNECTIONS, MAX_OUTBOUND_FULL_RELAY_CONNECTIONS + MAX_BLOCK_RELAY_ONLY_CONNECTIONS + MAX_FEELER_CONNECTIONS, MAX_ADDNODE_CONNECTIONS, MAX_PRIVATE_BROADCAST_CONNECTIONS),

                   ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-inboundrelaypercent=<n>", strprintf("Permit a maximum percent of inbound connections to relay transactions, to limit memory utilization (0 to 100, default: %u).", DEFAULT_FULL_RELAY_INBOUND_PCT), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-maxreceivebuffer=<n>", strprintf("Maximum per-connection receive buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXRECEIVEBUFFER), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-maxsendbuffer=<n>", strprintf("Maximum per-connection memory usage for the send buffer, <n>*1000 bytes (default: %u)", DEFAULT_MAXSENDBUFFER), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-maxuploadtarget=<n>", strprintf("Tries to keep outbound traffic under the given target per 24h. Limit does not apply to peers with 'download' permission or blocks created within past week. 0 = no limit (default: %s). Optional suffix units [k|K|m|M|g|G|t|T] (default: M). Lowercase is 1000 base while uppercase is 1024 base", DEFAULT_MAX_UPLOAD_TARGET), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

#ifdef HAVE_SOCKADDR_UN

    argsman.AddArg("-onion=<ip:port|path>", "Use separate SOCKS5 proxy to reach peers via Tor onion services, set -noonion to disable (default: -proxy). May be a local file path prefixed with 'unix:'.", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

#else

    argsman.AddArg("-onion=<ip:port>", "Use separate SOCKS5 proxy to reach peers via Tor onion services, set -noonion to disable (default: -proxy)", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

#endif

    argsman.AddArg("-i2psam=<ip:port>", "I2P SAM proxy to reach I2P peers and accept I2P connections", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-i2pacceptincoming", strprintf("Whether to accept inbound I2P connections (default: %i). Ignored if -i2psam is not set. Listening for inbound I2P connections is done through the SAM proxy, not by binding to a local address and port.", DEFAULT_I2P_ACCEPT_INCOMING), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-onlynet=<net>", "Make automatic outbound connections only to network <net> (" + Join(GetNetworkNames(), ", ") + "). Inbound and manual connections are not affected by this option. It can be specified multiple times to allow multiple networks.", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-v2transport", strprintf("Support v2 transport (default: %u)", DEFAULT_V2_TRANSPORT), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-peerbloomfilters", strprintf("Support filtering of blocks and transaction with bloom filters (default: %u)", DEFAULT_PEERBLOOMFILTERS), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-peerblockfilters", strprintf("Serve compact block filters to peers per BIP 157 (default: %u)", DEFAULT_PEERBLOCKFILTERS), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-txreconciliation", strprintf("Enable transaction reconciliations per BIP 330 (default: %d)", DEFAULT_TXRECONCILIATION_ENABLE), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CONNECTION);

    argsman.AddArg("-port=<port>", strprintf("Listen for connections on <port> (default: %u, testnet3: %u, testnet4: %u, signet: %u, regtest: %u). Not relevant for I2P (see doc/i2p.md). If set to a value x, the default onion listening port will be set to x+1.", defaultChainParams->GetDefaultPort(), testnetChainParams->GetDefaultPort(), testnet4ChainParams->GetDefaultPort(), signetChainParams->GetDefaultPort(), regtestChainParams->GetDefaultPort()), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::CONNECTION);

    const std::string proxy_doc_for_value =

#ifdef HAVE_SOCKADDR_UN

        "<ip>[:<port>]|unix:<path>";

#else

        "<ip>[:<port>]";

#endif

    const std::string proxy_doc_for_unix_socket =

#ifdef HAVE_SOCKADDR_UN

        "May be a local file path prefixed with 'unix:' if the proxy supports it. ";

#else

        "";

#endif

    argsman.AddArg("-proxy=" + proxy_doc_for_value + "[=<network>]",

                   "Connect through SOCKS5 proxy, set -noproxy to disable. " +

                   proxy_doc_for_unix_socket +

                   "Could end in =network to set the proxy only for that network. " +

                   "The network can be any of ipv4, ipv6, tor or cjdns. " +

                   "(default: disabled)",

                   ArgsManager::ALLOW_ANY | ArgsManager::DISALLOW_ELISION,

                   OptionsCategory::CONNECTION);

    argsman.AddArg("-proxyrandomize", strprintf("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)", DEFAULT_PROXYRANDOMIZE), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-seednode=<ip>", "Connect to a node to retrieve peer addresses, and disconnect. This option can be specified multiple times to connect to multiple nodes. During startup, seednodes will be tried before dnsseeds.", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-networkactive", "Enable all P2P network activity (default: 1). Can be changed by the setnetworkactive RPC command", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-timeout=<n>", strprintf("Specify socket connection timeout in milliseconds. If an initial attempt to connect is unsuccessful after this amount of time, drop it (minimum: 1, default: %d)", DEFAULT_CONNECT_TIMEOUT), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-peertimeout=<n>", strprintf("Specify a p2p connection timeout delay in seconds. After connecting to a peer, wait this amount of time before considering disconnection based on inactivity (minimum: 1, default: %d)", DEFAULT_PEER_CONNECT_TIMEOUT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::CONNECTION);

    argsman.AddArg("-torcontrol=<ip>:<port>", strprintf("Tor control host and port to use if onion listening enabled (default: %s). If no port is specified, the default port of %i will be used.", DEFAULT_TOR_CONTROL, DEFAULT_TOR_CONTROL_PORT), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-torpassword=<pass>", "Tor control port password (default: empty)", ArgsManager::ALLOW_ANY | ArgsManager::SENSITIVE, OptionsCategory::CONNECTION);

    argsman.AddArg("-natpmp", strprintf("Use PCP or NAT-PMP to map the listening port (default: %u)", DEFAULT_NATPMP), ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-whitebind=<[permissions@]addr>", "Bind to the given address and add permission flags to the peers connecting to it. "

        "Use [host]:port notation for IPv6. Allowed permissions: " + Join(NET_PERMISSIONS_DOC, ", ") + ". "

        "Specify multiple permissions separated by commas (default: download,noban,mempool,relay). Can be specified multiple times.", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    argsman.AddArg("-whitelist=<[permissions@]IP address or network>", "Add permission flags to the peers using the given IP address (e.g. 1.2.3.4) or "

        "CIDR-notated network (e.g. 1.2.3.0/24). Uses the same permissions as "

        "-whitebind. "

        "Additional flags \"in\" and \"out\" control whether permissions apply to incoming connections and/or manual (default: incoming only). "

        "Can be specified multiple times.", ArgsManager::ALLOW_ANY, OptionsCategory::CONNECTION);

    g_wallet_init_interface.AddWalletOptions(argsman);

#ifdef ENABLE_ZMQ

    argsman.AddArg("-zmqpubhashblock=<address>", "Enable publish hash block in <address>", ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubhashtx=<address>", "Enable publish hash transaction in <address>", ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubrawblock=<address>", "Enable publish raw block in <address>", ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubrawtx=<address>", "Enable publish raw transaction in <address>", ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubsequence=<address>", "Enable publish hash block and tx sequence in <address>", ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubhashblockhwm=<n>", strprintf("Set publish hash block outbound message high water mark (default: %d)", CZMQAbstractNotifier::DEFAULT_ZMQ_SNDHWM), ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubhashtxhwm=<n>", strprintf("Set publish hash transaction outbound message high water mark (default: %d)", CZMQAbstractNotifier::DEFAULT_ZMQ_SNDHWM), ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubrawblockhwm=<n>", strprintf("Set publish raw block outbound message high water mark (default: %d)", CZMQAbstractNotifier::DEFAULT_ZMQ_SNDHWM), ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubrawtxhwm=<n>", strprintf("Set publish raw transaction outbound message high water mark (default: %d)", CZMQAbstractNotifier::DEFAULT_ZMQ_SNDHWM), ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

    argsman.AddArg("-zmqpubsequencehwm=<n>", strprintf("Set publish hash sequence message high water mark (default: %d)", CZMQAbstractNotifier::DEFAULT_ZMQ_SNDHWM), ArgsManager::ALLOW_ANY, OptionsCategory::ZMQ);

#else

    hidden_args.emplace_back("-zmqpubhashblock=<address>");

    hidden_args.emplace_back("-zmqpubhashtx=<address>");

    hidden_args.emplace_back("-zmqpubrawblock=<address>");

    hidden_args.emplace_back("-zmqpubrawtx=<address>");

    hidden_args.emplace_back("-zmqpubsequence=<n>");

    hidden_args.emplace_back("-zmqpubhashblockhwm=<n>");

    hidden_args.emplace_back("-zmqpubhashtxhwm=<n>");

    hidden_args.emplace_back("-zmqpubrawblockhwm=<n>");

    hidden_args.emplace_back("-zmqpubrawtxhwm=<n>");

    hidden_args.emplace_back("-zmqpubsequencehwm=<n>");

#endif

    argsman.AddArg("-checkblocks=<n>", strprintf("How many blocks to check at startup (default: %u, 0 = all)", DEFAULT_CHECKBLOCKS), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-checklevel=<n>", strprintf("How thorough the block verification of -checkblocks is: %s (0-4, default: %u)", Join(CHECKLEVEL_DOC, ", "), DEFAULT_CHECKLEVEL), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-checkblockindex", strprintf("Do a consistency check for the block tree, chainstate, and other validation data structures every <n> operations. Use 0 to disable. (default: %u, regtest: %u)", defaultChainParams->DefaultConsistencyChecks(), regtestChainParams->DefaultConsistencyChecks()), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-checkaddrman=<n>", strprintf("Run addrman consistency checks every <n> operations. Use 0 to disable. (default: %u)", DEFAULT_ADDRMAN_CONSISTENCY_CHECKS), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-checkmempool=<n>", strprintf("Run mempool consistency checks every <n> transactions. Use 0 to disable. (default: %u, regtest: %u)", defaultChainParams->DefaultConsistencyChecks(), regtestChainParams->DefaultConsistencyChecks()), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    // Checkpoints were removed. We keep `-checkpoints` as a hidden arg to display a more user friendly error when set.

    argsman.AddArg("-checkpoints", "", ArgsManager::ALLOW_ANY, OptionsCategory::HIDDEN);

    argsman.AddArg("-deprecatedrpc=<method>", "Allows deprecated RPC method(s) to be used", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-stopafterblockimport", strprintf("Stop running after importing blocks from disk (default: %u)", DEFAULT_STOPAFTERBLOCKIMPORT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-stopatheight", strprintf("Stop running after reaching the given height in the main chain (default: %u). Blocks after target height may be processed during shutdown.", DEFAULT_STOPATHEIGHT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-limitancestorcount=<n>", strprintf("Deprecated setting to not accept transactions if number of in-mempool ancestors is <n> or more (default: %u); replaced by cluster limits (see -limitclustercount) and only used by wallet for coin selection", DEFAULT_ANCESTOR_LIMIT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    // Ancestor and descendant size limits were removed. We keep

    // -limitancestorsize/-limitdescendantsize as hidden args to display a more

    // user friendly error when set.

    argsman.AddArg("-limitancestorsize", "", ArgsManager::ALLOW_ANY, OptionsCategory::HIDDEN);

    argsman.AddArg("-limitdescendantsize", "", ArgsManager::ALLOW_ANY, OptionsCategory::HIDDEN);

    argsman.AddArg("-limitdescendantcount=<n>", strprintf("Deprecated setting to not accept transactions if any ancestor would have <n> or more in-mempool descendants (default: %u); replaced by cluster limits (see -limitclustercount) and only used by wallet for coin selection", DEFAULT_DESCENDANT_LIMIT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-test=<option>", "Pass a test-only option. Options include : " + Join(TEST_OPTIONS_DOC, ", ") + ".", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-limitclustercount=<n>", strprintf("Do not accept transactions into mempool which are directly or indirectly connected to <n> or more other unconfirmed transactions (default: %u, maximum: %u)", DEFAULT_CLUSTER_LIMIT, MAX_CLUSTER_COUNT_LIMIT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-limitclustersize=<n>", strprintf("Do not accept transactions whose virtual size with all in-mempool connected transactions exceeds <n> kilobytes (default: %u)", DEFAULT_CLUSTER_SIZE_LIMIT_KVB), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-capturemessages", "Capture all P2P messages to disk", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-mocktime=<n>", "Replace actual time with " + UNIX_EPOCH_TIME + " (default: 0)", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-maxsigcachesize=<n>", strprintf("Limit sum of signature cache and script execution cache sizes to <n> MiB (default: %u)", DEFAULT_VALIDATION_CACHE_BYTES >> 20), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-maxtipage=<n>",

                   strprintf("Maximum tip age in seconds to consider node in initial block download (default: %u)",

                             Ticks<std::chrono::seconds>(DEFAULT_MAX_TIP_AGE)),

                   ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-printpriority", strprintf("Log transaction fee rate in %s/kvB when mining blocks (default: %u)", CURRENCY_UNIT, DEFAULT_PRINT_MODIFIED_FEE), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-uacomment=<cmt>", "Append comment to the user agent string", ArgsManager::ALLOW_ANY, OptionsCategory::DEBUG_TEST);

    SetupChainParamsBaseOptions(argsman);

    argsman.AddArg("-acceptnonstdtxn", strprintf("Relay and mine \"non-standard\" transactions (test networks only; default: %u)", DEFAULT_ACCEPT_NON_STD_TXN), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-incrementalrelayfee=<amt>", strprintf("Fee rate (in %s/kvB) used to define cost of relay, used for mempool limiting and replacement policy. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_INCREMENTAL_RELAY_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-dustrelayfee=<amt>", strprintf("Fee rate (in %s/kvB) used to define dust, the value of an output such that it will cost more than its value in fees at this fee rate to spend it. (default: %s)", CURRENCY_UNIT, FormatMoney(DUST_RELAY_TX_FEE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-acceptstalefeeestimates", strprintf("Read fee estimates even if they are stale (%sdefault: %u) fee estimates are considered stale if they are %s hours old", "regtest only; ", DEFAULT_ACCEPT_STALE_FEE_ESTIMATES, Ticks<std::chrono::hours>(MAX_FILE_AGE)), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::DEBUG_TEST);

    argsman.AddArg("-bytespersigop", strprintf("Equivalent bytes per sigop in transactions for relay and mining (default: %u)", DEFAULT_BYTES_PER_SIGOP), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-datacarrier", strprintf("Relay and mine data carrier transactions (default: %u)", DEFAULT_ACCEPT_DATACARRIER), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-datacarriersize",

                   strprintf("Relay and mine transactions whose data-carrying raw scriptPubKeys in aggregate "

                             "are of this size or less, allowing multiple outputs (default: %u)",

                             MAX_OP_RETURN_RELAY),

                   ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-permitbaremultisig", strprintf("Relay transactions creating non-P2SH multisig outputs (default: %u)", DEFAULT_PERMIT_BAREMULTISIG), ArgsManager::ALLOW_ANY,

                   OptionsCategory::NODE_RELAY);

    argsman.AddArg("-minrelaytxfee=<amt>", strprintf("Fees (in %s/kvB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)",

        CURRENCY_UNIT, FormatMoney(DEFAULT_MIN_RELAY_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-txsendrate=<n>",

                   strprintf("Set the maximum ongoing rate for sending transactions to (inbound) peers (default: %u tx/s)",

                             DEFAULT_TX_SEND_RATE),

                   ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-privatebroadcast",

                   strprintf(

                       "EXPERIMENTAL: Broadcast transactions submitted via sendrawtransaction RPC using short-lived "

                       "connections through the Tor or I2P networks, without putting them in the mempool first. "

                       "This provides best-effort concealment of the transaction's origin. "

                       "Transactions submitted through the wallet are not affected by this option "

                       "(default: %u)",

                   DEFAULT_PRIVATE_BROADCAST),

                   ArgsManager::ALLOW_ANY,

                   OptionsCategory::NODE_RELAY);

    argsman.AddArg("-whitelistforcerelay", strprintf("Add 'forcerelay' permission to whitelisted peers with default permissions. This will relay transactions even if the transactions were already in the mempool. (default: %d)", DEFAULT_WHITELISTFORCERELAY), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-whitelistrelay", strprintf("Add 'relay' permission to whitelisted peers with default permissions. This will accept relayed transactions even when not relaying transactions (default: %d)", DEFAULT_WHITELISTRELAY), ArgsManager::ALLOW_ANY, OptionsCategory::NODE_RELAY);

    argsman.AddArg("-blockmaxweight=<n>", strprintf("Set maximum BIP141 block weight (default: %d)", DEFAULT_BLOCK_MAX_WEIGHT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::BLOCK_CREATION);

    argsman.AddArg("-blockreservedweight=<n>", strprintf("Reserve space for the fixed-size block header plus the largest coinbase transaction the mining software may add to the block. Only affects mining RPC clients, not IPC clients. (default: %d).", DEFAULT_BLOCK_RESERVED_WEIGHT), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);

    argsman.AddArg("-blockmintxfee=<amt>", strprintf("Set lowest fee rate (in %s/kvB) for transactions to be included in block creation. (default: %s)", CURRENCY_UNIT, FormatMoney(DEFAULT_BLOCK_MIN_TX_FEE)), ArgsManager::ALLOW_ANY, OptionsCategory::BLOCK_CREATION);

    argsman.AddArg("-blockversion=<n>", "Override block version to test forking scenarios", ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::BLOCK_CREATION);

    argsman.AddArg("-rest", strprintf("Accept public REST requests (default: %u)", DEFAULT_REST_ENABLE), ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcallowip=<ip>", "Allow JSON-RPC connections from specified source. Valid values for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0), a network/CIDR (e.g. 1.2.3.4/24), all ipv4 (0.0.0.0/0), or all ipv6 (::/0). RFC4193 is allowed only if -cjdnsreachable=0. This option can be specified multiple times", ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcauth=<userpw>", "Username and HMAC-SHA-256 hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcauth. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times", ArgsManager::ALLOW_ANY | ArgsManager::SENSITIVE, OptionsCategory::RPC);

    argsman.AddArg("-rpcbind=<addr>[:port]", "Bind to given address to listen for JSON-RPC connections. Do not expose the RPC server to untrusted networks such as the public internet! This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost)", ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::RPC);

    argsman.AddArg("-rpcdoccheck", strprintf("Throw a non-fatal error at runtime if the documentation for an RPC is incorrect (default: %u)", DEFAULT_RPC_DOC_CHECK), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::RPC);

    argsman.AddArg("-rpccookiefile=<loc>", "Location of the auth cookie. Relative paths will be prefixed by a net-specific datadir location. (default: data dir)", ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpccookieperms=<readable-by>", strprintf("Set permissions on the RPC auth cookie file so that it is readable by [owner|group|all] (default: owner [via umask 0077])"), ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcmaxconnections=<n>", strprintf("The maximum number of connected HTTP clients (default: %d)", DEFAULT_MAX_HTTP_CONNECTIONS), ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcpassword=<pw>", "Password for JSON-RPC connections", ArgsManager::ALLOW_ANY | ArgsManager::SENSITIVE, OptionsCategory::RPC);

    argsman.AddArg("-rpcport=<port>", strprintf("Listen for JSON-RPC connections on <port> (default: %u, testnet3: %u, testnet4: %u, signet: %u, regtest: %u)", defaultBaseParams->RPCPort(), testnetBaseParams->RPCPort(), testnet4BaseParams->RPCPort(), signetBaseParams->RPCPort(), regtestBaseParams->RPCPort()), ArgsManager::ALLOW_ANY | ArgsManager::NETWORK_ONLY, OptionsCategory::RPC);

    argsman.AddArg("-rpcservertimeout=<n>", strprintf("Timeout during HTTP requests (default: %d)", DEFAULT_HTTP_SERVER_TIMEOUT), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::RPC);

    argsman.AddArg("-rpcthreads=<n>", strprintf("Set the number of threads to service RPC calls (default: %d)", DEFAULT_HTTP_THREADS), ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcuser=<user>", "Username for JSON-RPC connections", ArgsManager::ALLOW_ANY | ArgsManager::SENSITIVE, OptionsCategory::RPC);

    argsman.AddArg("-rpcwhitelist=<whitelist>", "Set a whitelist to filter incoming RPC calls for a specific user. The field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc 2>,...,<rpc n>. If multiple whitelists are set for a given user, they are set-intersected. See -rpcwhitelistdefault documentation for information on default whitelist behavior.", ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcwhitelistdefault", "Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault is set to 0, if any -rpcwhitelist is set, the rpc server acts as if all rpc users are subject to empty-unless-otherwise-specified whitelists. If rpcwhitelistdefault is set to 1 and no -rpcwhitelist is set, rpc server acts as if all rpc users are subject to empty whitelists.", ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    argsman.AddArg("-rpcworkqueue=<n>", strprintf("Set the maximum depth of the work queue to service RPC calls (default: %d)", DEFAULT_HTTP_WORKQUEUE), ArgsManager::ALLOW_ANY | ArgsManager::DEBUG_ONLY, OptionsCategory::RPC);

    argsman.AddArg("-server", "Accept command line and JSON-RPC commands", ArgsManager::ALLOW_ANY, OptionsCategory::RPC);

    if (can_listen_ipc) {

        argsman.AddArg("-ipcbind=<address>", strprintf("Bind to Unix socket address and listen for incoming connections. Valid address values are \"unix\" to listen on the default path, <datadir>/node.sock, or \"unix:/custom/path\" to specify a custom path. Append \",max-connections=8\", for example \"unix:/custom/path,max-connections=8\", to limit the number of simultaneous connections on that address (default: %d, maximum: %d). Can be specified multiple times to listen on multiple paths. Default behavior is not to listen on any path. If relative paths are specified, they are interpreted relative to the network data directory. If paths include any parent directory components and the parent directories do not exist, they will be created. Enabling this gives local processes that can access the socket unauthenticated RPC access, so it's important to choose a path with secure permissions if customizing this.",ipc::DEFAULT_MAX_CONNECTIONS, ipc::MAX_CONNECTIONS), ArgsManager::ALLOW_ANY, OptionsCategory::IPC);

    }

#if HAVE_DECL_FORK

    argsman.AddArg("-daemon", strprintf("Run in the background as a daemon and accept commands (default: %d)", DEFAULT_DAEMON), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

    argsman.AddArg("-daemonwait", strprintf("Wait for initialization to be finished before exiting. This implies -daemon (default: %d)", DEFAULT_DAEMONWAIT), ArgsManager::ALLOW_ANY, OptionsCategory::OPTIONS);

#else

    hidden_args.emplace_back("-daemon");

    hidden_args.emplace_back("-daemonwait");

#endif

    // Add the hidden options

    argsman.AddHiddenArgs(hidden_args);

}

#if HAVE_SYSTEM

static void StartupNotify(const ArgsManager& args)

{

    std::string cmd = args.GetArg("-startupnotify", "");

    if (!cmd.empty()) {

        std::thread t(runCommand, cmd);

        t.detach(); // thread runs free

    }

}

#endif

static bool AppInitServers(NodeContext& node)

{

    const ArgsManager& args = *Assert(node.args);

    if (!InitHTTPServer()) {

        return false;

    }

    StartRPC();

    node.rpc_interruption_point = RpcInterruptionPoint;

    if (!StartHTTPRPC(&node))

        return false;

    if (args.GetBoolArg("-rest", DEFAULT_REST_ENABLE)) StartREST(&node);

    StartHTTPServer();

    return true;

}

// Parameter interaction based on rules

void InitParameterInteraction(ArgsManager& args)

{

    // when specifying an explicit binding address, you want to listen on it

    // even when -connect or -proxy is specified

    if (!args.GetArgs("-bind").empty()) {

        if (args.SoftSetBoolArg("-listen", true))

            LogInfo("parameter interaction: -bind set -> setting -listen=1\n");

    }

    if (!args.GetArgs("-whitebind").empty()) {

        if (args.SoftSetBoolArg("-listen", true))

            LogInfo("parameter interaction: -whitebind set -> setting -listen=1\n");

    }

    if (!args.GetArgs("-connect").empty() || args.IsArgNegated("-connect") || args.GetIntArg("-maxconnections", DEFAULT_MAX_PEER_CONNECTIONS) <= 0) {

        // when only connecting to trusted nodes, do not seed via DNS, or listen by default

        // do the same when connections are disabled

        if (args.SoftSetBoolArg("-dnsseed", false))

            LogInfo("parameter interaction: -connect or -maxconnections=0 set -> setting -dnsseed=0\n");

        if (args.SoftSetBoolArg("-listen", false))

            LogInfo("parameter interaction: -connect or -maxconnections=0 set -> setting -listen=0\n");

    }

    std::string proxy_arg = args.GetArg("-proxy", "");

    if (proxy_arg != "" && proxy_arg != "0") {

        // to protect privacy, do not listen by default if a default proxy server is specified

        if (args.SoftSetBoolArg("-listen", false))

            LogInfo("parameter interaction: -proxy set -> setting -listen=0\n");

        // to protect privacy, do not map ports when a proxy is set. The user may still specify -listen=1

        // to listen locally, so don't rely on this happening through -listen below.

        if (args.SoftSetBoolArg("-natpmp", false)) {

            LogInfo("parameter interaction: -proxy set -> setting -natpmp=0\n");

        }

        // to protect privacy, do not discover addresses by default

        if (args.SoftSetBoolArg("-discover", false))

            LogInfo("parameter interaction: -proxy set -> setting -discover=0\n");

    }

    if (!args.GetBoolArg("-listen", DEFAULT_LISTEN)) {

        // do not map ports or try to retrieve public IP when not listening (pointless)

        if (args.SoftSetBoolArg("-natpmp", false)) {

            LogInfo("parameter interaction: -listen=0 -> setting -natpmp=0\n");

        }

        if (args.SoftSetBoolArg("-discover", false))

            LogInfo("parameter interaction: -listen=0 -> setting -discover=0\n");

        if (args.SoftSetBoolArg("-listenonion", false))

            LogInfo("parameter interaction: -listen=0 -> setting -listenonion=0\n");

        if (args.SoftSetBoolArg("-i2pacceptincoming", false)) {

            LogInfo("parameter interaction: -listen=0 -> setting -i2pacceptincoming=0\n");

        }

    }

    if (!args.GetArgs("-externalip").empty()) {

        // if an explicit public IP is specified, do not try to find others

        if (args.SoftSetBoolArg("-discover", false))

            LogInfo("parameter interaction: -externalip set -> setting -discover=0\n");

    }

    if (args.GetBoolArg("-blocksonly", DEFAULT_BLOCKSONLY)) {

        // disable whitelistrelay in blocksonly mode

        if (args.SoftSetBoolArg("-whitelistrelay", false))

            LogInfo("parameter interaction: -blocksonly=1 -> setting -whitelistrelay=0\n");

        // Reduce default mempool size in blocksonly mode to avoid unexpected resource usage

        if (args.SoftSetArg("-maxmempool", ToString(DEFAULT_BLOCKSONLY_MAX_MEMPOOL_SIZE_MB)))

            LogInfo("parameter interaction: -blocksonly=1 -> setting -maxmempool=%d\n", DEFAULT_BLOCKSONLY_MAX_MEMPOOL_SIZE_MB);

    }

    // Forcing relay from whitelisted hosts implies we will accept relays from them in the first place.

    if (args.GetBoolArg("-whitelistforcerelay", DEFAULT_WHITELISTFORCERELAY)) {

        if (args.SoftSetBoolArg("-whitelistrelay", true))

            LogInfo("parameter interaction: -whitelistforcerelay=1 -> setting -whitelistrelay=1\n");

    }

    const auto onlynets = args.GetArgs("-onlynet");

    if (!onlynets.empty()) {

        bool clearnet_reachable = std::any_of(onlynets.begin(), onlynets.end(), [](const auto& net) {

            const auto n = ParseNetwork(net);

            return n == NET_IPV4 || n == NET_IPV6;

        });

        if (!clearnet_reachable && args.SoftSetBoolArg("-dnsseed", false)) {

            LogInfo("parameter interaction: -onlynet excludes IPv4 and IPv6 -> setting -dnsseed=0\n");

        }

    }

}

/**

 * Initialize global loggers.

 *

 * Note that this is called very early in the process lifetime, so you should be

 * careful about what global state you rely on here.

 */

void InitLogging(const ArgsManager& args)

{

    init::SetLoggingOptions(args);

    init::LogPackageVersion();

}

namespace { // Variables internal to initialization process only

int num_p2p_max_connections;

int available_fds;

ServiceFlags g_local_services = ServiceFlags(NODE_NETWORK_LIMITED | NODE_WITNESS);

int64_t peer_connect_timeout;

std::set<BlockFilterType> g_enabled_filter_types;

} // namespace

[[noreturn]] static void new_handler_terminate()

{

    // Rather than throwing std::bad-alloc if allocation fails, terminate

    // immediately to (try to) avoid chain corruption.

    // Since logging may itself allocate memory, set the handler directly

    // to terminate first.

    std::set_new_handler(std::terminate);

    LogError("Out of memory. Terminating.\n");

    // The log was successful, terminate now.

    std::terminate();

};

bool AppInitBasicSetup(const ArgsManager& args, std::atomic<int>& exit_status)

{

    // ********************************************************* Step 1: setup

#ifdef _MSC_VER

    // Turn off Microsoft heap dump noise

    _CrtSetReportMode(_CRT_WARN, _CRTDBG_MODE_FILE);

    _CrtSetReportFile(_CRT_WARN, CreateFileA("NUL", GENERIC_WRITE, 0, nullptr, OPEN_EXISTING, 0, 0));

    // Disable confusing "helpful" text message on abort, Ctrl-C

    _set_abort_behavior(0, _WRITE_ABORT_MSG | _CALL_REPORTFAULT);

#endif

#ifdef WIN32

    // Enable heap terminate-on-corruption

    HeapSetInformation(nullptr, HeapEnableTerminationOnCorruption, nullptr, 0);

#endif

    if (!SetupNetworking()) {

        return InitError(Untranslated("Initializing networking failed."));

    }

#ifndef WIN32

    // Clean shutdown on SIGTERM

    registerSignalHandler(SIGTERM, HandleSIGTERM);

    registerSignalHandler(SIGINT, HandleSIGTERM);

    // Reopen debug.log on SIGHUP

    registerSignalHandler(SIGHUP, HandleSIGHUP);

    // Ignore SIGPIPE, otherwise it will bring the daemon down if the client closes unexpectedly

    signal(SIGPIPE, SIG_IGN);

#else

    SetConsoleCtrlHandler(consoleCtrlHandler, true);

#endif

    std::set_new_handler(new_handler_terminate);

    return true;

}

bool AppInitParameterInteraction(const ArgsManager& args)

{

    const CChainParams& chainparams = Params();

    // ********************************************************* Step 2: parameter interactions

    // also see: InitParameterInteraction()

    // We removed checkpoints but keep the option to warn users who still have it in their config.

    if (args.IsArgSet("-checkpoints")) {

        InitWarning(_("Option '-checkpoints' is set but checkpoints were removed. This option has no effect."));

    }

    if (args.IsArgSet("-limitancestorsize")) {

        InitWarning(_("Option '-limitancestorsize' is given but ancestor size limits have been replaced with cluster size limits (see -limitclustersize). This option has no effect."));

    }

    if (args.IsArgSet("-limitdescendantsize")) {

        InitWarning(_("Option '-limitdescendantsize' is given but descendant size limits have been replaced with cluster size limits (see -limitclustersize). This option has no effect."));

    }

    // Error if network-specific options (-addnode, -connect, etc) are

    // specified in default section of config file, but not overridden

    // on the command line or in this chain's section of the config file.

    ChainType chain = args.GetChainType();

    if (chain == ChainType::SIGNET) {

        LogInfo("Signet derived magic (message start): %s", HexStr(chainparams.MessageStart()));

    }

    bilingual_str errors;

    for (const auto& arg : args.GetUnsuitableSectionOnlyArgs()) {

        errors += strprintf(_("Config setting for %s only applied on %s network when in [%s] section."), arg, ChainTypeToString(chain), ChainTypeToString(chain)) + Untranslated("\n");

    }

    if (!errors.empty()) {

        return InitError(errors);

    }

    // Testnet3 deprecation warning

    if (chain == ChainType::TESTNET) {

        LogInfo("Warning: Support for testnet3 is deprecated and will be removed in an upcoming release. Consider switching to testnet4.\n");

    }

    // Warn if unrecognized section name are present in the config file.

    bilingual_str warnings;

    for (const auto& section : args.GetUnrecognizedSections()) {

        warnings += Untranslated(strprintf("%s:%i ", section.m_file, section.m_line)) + strprintf(_("Section [%s] is not recognized."), section.m_name) + Untranslated("\n");

    }

    if (!warnings.empty()) {

        InitWarning(warnings);

    }

    if (!fs::is_directory(args.GetBlocksDirPath())) {

        return InitError(strprintf(_("Specified blocks directory \"%s\" does not exist."), args.GetArg("-blocksdir", "")));

    }

    // parse and validate enabled filter types

    std::string blockfilterindex_value = args.GetArg("-blockfilterindex", DEFAULT_BLOCKFILTERINDEX);

    if (blockfilterindex_value == "" || blockfilterindex_value == "1") {

        g_enabled_filter_types = AllBlockFilterTypes();

    } else if (blockfilterindex_value != "0") {

        const std::vector<std::string> names = args.GetArgs("-blockfilterindex");

        for (const auto& name : names) {

            BlockFilterType filter_type;

            if (!BlockFilterTypeByName(name, filter_type)) {

                return InitError(strprintf(_("Unknown -blockfilterindex value %s."), name));

            }

            g_enabled_filter_types.insert(filter_type);

        }

    }

    // Signal NODE_P2P_V2 if BIP324 v2 transport is enabled.

    if (args.GetBoolArg("-v2transport", DEFAULT_V2_TRANSPORT)) {

        g_local_services = ServiceFlags(g_local_services | NODE_P2P_V2);

    }

    // Signal NODE_COMPACT_FILTERS if peerblockfilters and basic filters index are both enabled.

    if (args.GetBoolArg("-peerblockfilters", DEFAULT_PEERBLOCKFILTERS)) {

        if (!g_enabled_filter_types.contains(BlockFilterType::BASIC)) {

            return InitError(_("Cannot set -peerblockfilters without -blockfilterindex."));

        }

        g_local_services = ServiceFlags(g_local_services | NODE_COMPACT_FILTERS);

    }

    if (args.GetIntArg("-prune", 0)) {

        if (args.GetBoolArg("-txindex", DEFAULT_TXINDEX))

            return InitError(_("Prune mode is incompatible with -txindex."));

        if (args.GetBoolArg("-txospenderindex", DEFAULT_TXOSPENDERINDEX))

            return InitError(_("Prune mode is incompatible with -txospenderindex."));

        if (args.GetBoolArg("-reindex-chainstate", false)) {

            return InitError(_("Prune mode is incompatible with -reindex-chainstate. Use full -reindex instead."));

        }

    }

    // If -forcednsseed is set to true, ensure -dnsseed has not been set to false

    if (args.GetBoolArg("-forcednsseed", DEFAULT_FORCEDNSSEED) && !args.GetBoolArg("-dnsseed", DEFAULT_DNSSEED)){

        return InitError(_("Cannot set -forcednsseed to true when setting -dnsseed to false."));

    }

    // -bind and -whitebind can't be set when not listening

    size_t num_user_p2p_bind = args.GetArgs("-bind").size() + args.GetArgs("-whitebind").size();

    if (num_user_p2p_bind != 0 && !args.GetBoolArg("-listen", DEFAULT_LISTEN)) {

        return InitError(Untranslated("Cannot set -bind or -whitebind together with -listen=0"));

    }